How to Create Your Own Motocross Dirt Bike Tracks in 4 Straightforward Steps
Posted: Tuesday, February 23, 2010
by Joshua Hardingur
JMS
Constructing dirt bike tracks is certainly not as demanding as it may seem. Most individuals assume they need loads of acreage, but even in an undersized area, with just a jump and a berm or 2 , it will be fun working on jumping and cornering skills. And as a bonus, hauling your racing bike somewhere else will become unnecessary.
You may not have 5 or 10 acres of property to fiddle with, but that doesn't mean you cannot build a fine course. You can still make a practical dirt bike track as long as you stick to a few essential rules. So long as you have got a bit of property and a tractor you can build a course that will offer you years of fun riding your dirt bikes. In fact, you may possibly discover that constructing dirt bike tracks is more fun than actually riding.
Before you begin revving up your Bobcat you initially want to get the go-ahead from several sources. Clearly, asking your parents for their approval is step number one, but there are other folks that need to offer their approval also. You need to be certain you get whatever permits are needed that will enable you to lawfully build and use your course.
It's also essential to chat with your neighbors concerning your idea. I know it's hard to imagine, but some folks do not like noisy dirt bikes drowning out the sound of their TV set or additional dirt settling on their outdoor furnishings. Save yourself a ton of hassles by being certain you get approval from your neighbors, otherwise there's a danger of constructing a dirt bike track that you cannot use. Spending time and cash constructing a nice course, only to have the regional authorities shut it all down, will not improve relations with your neighbors.
Step 2 - Location is Another Essential Factor
If your course is too close to neighbors you'll have a noise and dust problem. If all of them possess dirt bike motorcycles you most likely will not have too much of a problem, however the probabilities of that are very small. If they seem a bit uneasy about you building a track near their home perhaps you can compromise and only use it on specified days of the week.
Let the landscape work in your favor by designing your track using existing hills and elevations. As an example, if you can find a site where the native terrain already possesses little hills you won't need to pay as a lot of time with the tractor making your own jumps from scratch.
If you have got the option of picking a spot with dry dirt or good clay soil, don't choose an imminent dust bowl. In addition to loud noises, dust and dirt can be a big negative for the neighbors. If at all possible, try to choose a site where an undue amount of dirt won't end up in your neighbor's backyard.
Low lying areas of land can become swamps during wet weather so plan the track so your paths will be above these areas. It will additionally help if you make the paths at an angle, allowing water to drain off instead of puddle. With correct designing you'll be able to eliminate a ton of impending track repair.
Step 3 - Prior to Hopping into the Tractor You Need to do Some Planning
Ride your bike around the property before selecting the route that your course will take. This will give you a good image on the natural flow of the property and enable you to style an adequate course layout. Dirt bike tracks must be built to take advantage of the natural topography that is already there. The course must additionally be based on your ability level. As an example, if you are a newbie it probably isn't wise to build jumps that you cannot deal with safely.
Above all else, dirt bike tracks ought to be built to be as safe as possible. Do not build jumps where large rocks and trees will make dirt biking dangerous. If you cannot get away from the rocks and trees position some padded barriers like old mattresses or hay bales in front of possibly damaging objects. If you are going to fall you want to be pick yourself up and get back to riding. Hospital trips aren't as much fun as they're cracked up to be.
Step 4 - Rev up that Tractor and Begin Moving that Dirt
If you don't have a suitable tractor in your driveway a Bobcat is your next best option. They can be rented, with or without an operator, at very reasonable prices. You may be surprised at how quickly your course will take form after you begin pushing that dirt around.
Mould several mounds into jumps that fit your ability level and make berms at the base of different hills. It's a good plan to form as many turns and corners as possible so that you won't be able to develop an excessive amount of speed going into the jumps.
Utilizing these four steps can help you build a dirt bike track that you'll be able to be proud of and that will be safe for years to come. Do yourself a favor and spend as much time as necessary coming up with the layout of the course. A well-designed plan will be safer, more fun, and need less labor and track repair.
Creating dirt bike tracks is always very gratifying in addition to being a great deal of fun. Dirt bike motorcycles are fun anywhere you race, but cornering, jumping, and racing on your own personal dirt bike track is always the most fun imaginable.
This Article has been viewed 1,975 times. (Not updated in real-time.)
No comments yet.We want your comments! If you can read this, you don't have javascript enabled, so you can't use this comment system. Please enable javascript.